|
SAC ACCESSORIES |
|
SAC
Imaging offers a carefully selected number of
accessories for its range of imagers that will enhance
an imager's performance. They include the SAC focal
reducer that increases the field of view of a telescope,
a USB amplifier kit that allows you to increase the
length of the USB cable to 25 meters (84 feet) and an
eyepiece projection adaptor that allows you to use any
SAC camera with a microscope or to adapt it for
projection photography using 1.25" eyepieces. |
| |
|
SAC Filter
Wheel |
 |
The SAC
Filter Wheel is placed in front of the camera. It allows
you to easily change filters for taking colour images
either by RGB, LRGB , CYM or LCYM. This will allow you
to change colour filters without removing the camera. The
wheel will hold 4 filters inside and 1 filter outside,
after placing the 1.25 adapter from the camera to the
filter wheel. It accepts standard 1.25" eyepiece and CCD
filters. |
 |
Press on the button to purchase this product in Europe |
|
|
|
SAC
Focal Reducer |
 |
This is a
combination F 0.5 and/or F 0.3 focal reducer. It can be
used with 1.25" eyepieces or with any of the
SAC cameras. The reducer is F 0.5 and F 0.3 is achieved
using an extension tube. This will fit on standard 1.25"
focusers. |
|
|
Press on the button to purchase this product in Europe |
| |
|
SAC
Infrared Filter |
 |
The SAC Infrared Filter assists
astrophotography by filtering unnecessary light
wavelengths that greatly improves the quality of images
taken with CCD imagers in general. It will fit to standard 1.25" eyepieces.
|
|
|
Press on the button to purchase this product in Europe |
| |
|
SAC
Eyepiece Projection Kit |
 |
The
Eyepiece Projection Kit will fit all 1.25" eyepieces. It
screws onto the T threads of the SAC cameras. It can
also be used to alter the focal length of your scope
when used with a SAC camera. |
|
|
Press on the button to purchase this product in Europe |
| |
|
SAC
Parafocal Ring |
 |
The SAC
parafocal Ring ring attaches to an 1.25" eyepiece and
allows you to adjust the eyepiece to be parafocal with
your camera. A thumb screw allows for easy positioning
and repositioning at any time. |
|
|
Press on the button to purchase this product in Europe |
| |
|
SAC USB 2.0
Amplifier Kit |
 |
The USB 2.0
amplifier is used to increase the USB cord length. SAC
cameras come with 20 feet of USB cable. To increase the
cable run beyond 20 feet USB amps are needed as computers
only supply a limited amount of power to USB
ports. Beyond the 20 feet range the power drop of the
signal makes the amplifier necessary. The amplifier
comes attached to an additional 16 feet of USB cable.
For each additional 16 feet of cable run, a USB amp is
needed. Maximum run of USB cable is approximately 84
feet (4 Amps). |
|
|
Press on the button to purchase this product in Europe |
| |
|
SAC
Power Supply Unit |
 |
A high
quality, switch mode 110/240 volt to 12V power supply
providing 4 Amps of current. Comes with two outlet
cigarette sockets to power the Peltier cooled SAC8, SAC8.5
and SAC 9 imagers. |
|
|
Press on the button to purchase this product in Europe |
| |
|
SAC Flip
Mirror |
 |
SAC Flip
Mirror for astrophotography, guiding, etc. |
|
|
Press on the button to purchase this product in Europe |
| |
|
HOME
|
SAC 10
|
SAC 9
|
SAC 8.5
|
SAC 4-II
|
SAC-Mintron
|
Accessories
|
Specifications |
|
Articles
|
Galleries
|
Dealers
|
Contact
|
Shop |
